testecu.com provides professional mobile auto diagnostics, advanced electronic diagnostics, ECU testing and fault finding directly on the vehicle.
Our approach is based on one simple principle:
Test before replacing. Confirm before repairing.
We work with:
private customers · garages · workshops · mechanics · body shops · companies · fleet operators · automotive professionals
with rapid mobile coverage across the French Riviera / Côte d’Azur, subject to availability.
Petrol · Diesel · Hybrid · Plug-in Hybrid · Electric
Advanced Diagnostics · Live Data · Active Tests · ECU Testing · Coding · Teach-in · Adaptation · Calibration · Programming · Fault Finding
Contact
WhatsApp / SMS / Phone: +33 6 66 77 33 00
E-mail: contact@bfgzone.com
Test before replacing
Many faults are diagnosed too quickly.
A fault code appears.
A component is immediately suspected.
The part is replaced.
And sometimes, the problem remains exactly the same.
An electronic fault does not automatically mean that the component mentioned by the control unit is actually defective.
The real cause may be:
wiring · power supply · ground · connector · incorrect signal · CAN network · another sensor · actuator · configuration · adaptation · software · mechanical fault
This is why we always prefer a structured process:
Test · Analyse · Confirm · Repair
Professional diagnostics before any intervention
Before any repair, programming procedure or parts replacement, it is essential to understand the actual cause of the fault.
Every day, perfectly functional original parts are replaced unnecessarily.
In some cases, a reliable OEM component is removed and replaced by a lower-quality aftermarket part simply because the fault was incorrectly interpreted.
Superficial diagnostics can therefore become very expensive.
Our objective is to prevent that.
A fault code is not a conclusion
A fault code means that a control unit has detected an abnormal condition.
It may indicate:
an inconsistency · a value outside tolerance · a missing signal · an abnormal operating condition · incorrect communication · unexpected system behaviour
But it does not automatically mean:
“replace this part”
The real question remains:
Why is this fault present?
That is the question professional diagnostics must answer.
Professional diagnostics go far beyond a basic scan
A basic diagnostic scan can read fault codes.
But that alone does not constitute proper fault finding.
Depending on the vehicle and system concerned, we may analyse:
fault codes · fault status · Live Data · actual values · target values · pressures · temperatures · voltages · currents · corrections · positions · counters · logical states · synchronisation · communication networks · fault history · operating conditions
Depending on the application, we may also perform:
active tests · actuator tests · bidirectional commands · adaptations · teach-in procedures · initialisations · basic settings · calibrations · coding · manufacturer-specific procedures
Need advanced diagnostics?
WhatsApp / SMS / Phone: +33 6 66 77 33 00
E-mail: contact@bfgzone.com
Reading a value is not enough
Professional diagnostic platforms can display a huge amount of information.
A temperature, voltage, pressure or correction may appear normal when viewed on its own.
But it may become significant when compared with:
a target value · another sensor · engine speed · load · temperature · another system status · the real conditions under which the fault occurs
Equipment matters.
But correct interpretation matters even more.
ECU and control-unit testing
One of the core objectives of testecu.com is to determine whether a control unit or electronic module is genuinely at fault.
Before condemning an ECU, TCU or other module, it is important to verify as far as possible:
power supply · grounds · communication · input signals · output signals · data consistency · network presence · internal status · fault conditions
In some cases, a control unit that appears defective may still be fully functional.
The real fault may be elsewhere.
Engine ECU
For an engine control unit, we may analyse depending on the vehicle:
ECU communication · voltages · engine parameters · synchronisation · injection · sensors · actuators · pressure data · temperatures · protection strategies · internal faults
An internal ECU fault code does not automatically mean the ECU must be replaced.
TCU and transmission systems
For transmission systems, we may analyse:
TCU faults · pressures · temperatures · adaptations · clutch values · positions · mechatronic states · teach-in values · communication
A transmission problem may be caused by:
a sensor · incorrect pressure · adaptation · clutch · mechatronics · wiring · the control unit
ABS / ESP
ABS or ESP faults may require analysis of:
wheel-speed sensors · wheel-speed values · power supply · CAN network · steering-angle data · brake pressure · acceleration sensors · control-unit states
Replacing an ABS module immediately without proper testing can be an expensive mistake.
Airbag / SRS
On airbag and SRS systems, we may analyse where applicable:
fault codes · crash status · sensors · supply voltage · communication · pyrotechnic components · internal control-unit states
Certain interventions may then require:
coding · adaptation · initialization · programming
depending on the manufacturer and system.
BSI / BCM and body electronics
Modern body control modules manage many functions:
lighting · locking · power distribution · comfort systems · wipers · windows · network communication · communication with other control units
A problem that appears to belong to one component may actually originate in another module or system.
Live Data – understand what the vehicle is really doing
Live Data allows us to observe the real behaviour of the vehicle.
Depending on the system, we may analyse:
fuel pressure · boost pressure · DPF differential pressure · exhaust temperature · injector corrections · lambda values · airflow · battery voltage · charging voltage · synchronisation · gearbox pressures · gearbox temperatures · BMS values · state of charge
and many other parameters.
Active tests and bidirectional control
Where supported, we can command certain components directly through the diagnostic platform.
Depending on the vehicle:
pumps · fans · relays · solenoids · actuators · electric motors · throttle bodies · flaps · lighting · climate-control components
may be tested individually.
These tests can help confirm:
whether the component responds · whether its power supply is correct · whether the control unit is commanding it correctly · whether the problem lies elsewhere
Diagnostics dedicated to the make and model
We do not apply one identical procedure to every vehicle.
Each diagnosis is adapted according to:
make · model · year · powertrain · electronic architecture · installed control units · symptoms · system concerned
The logic of a Mercedes-Benz is not identical to that of a BMW, Audi, Peugeot, Renault, Toyota or Tesla.
The following must therefore be adapted to the real vehicle:
tool · procedure · expected values · interpretation
Multi-brand diagnostics
We work on many manufacturers including:
Mercedes-Benz · BMW · MINI · Audi · Volkswagen · Porsche · Skoda · SEAT / CUPRA · Renault · Dacia · Peugeot · Citroën · DS · Opel · Fiat · Alfa Romeo · Ford · Toyota · Lexus · Nissan · Hyundai · Kia · Volvo · Land Rover · Jaguar · Tesla
as well as many others.
Exact capabilities depend on:
model · year · system · available access level
Avoid unnecessary parts replacement
Before replacing a:
control unit · sensor · injector · turbocharger · EGR valve · DPF · battery · electronic module · transmission component · hybrid component
it is preferable to confirm that the part is actually responsible for the problem.
A fault may be caused by:
poor ground · incorrect voltage · oxidised connector · broken wire · inconsistent signal · incorrect adaptation · wrong configuration · software issue
The suspected component may still be perfectly functional.
Keep original components when they are still good
A functional OEM part should not be replaced simply because a fault code appears to point towards it.
Incorrect interpretation may lead to replacing:
a reliable original component
with:
a lower-quality aftermarket part
without fixing the original problem.
Correct testing helps prevent this.
Professional PDF diagnostic report
After the intervention, the diagnostic results can be saved as a professional PDF report.
Depending on the vehicle and equipment, the report may include:
vehicle identification · control units scanned · fault codes · fault status · technical information available at the time of diagnosis
The report is sent by:
e-mail · SMS · WhatsApp
Receive your report or arrange an intervention
WhatsApp / SMS / Phone: +33 6 66 77 33 00
E-mail: contact@bfgzone.com
A useful technical history
The report can be retained as part of the vehicle’s technical history.
It can later be shared with:
a garage · mechanic · dealership · electronics specialist
It provides a useful technical basis for further repairs.
Compare diagnostics over time
Keeping several reports makes it possible to compare the vehicle’s condition over time.
You can see:
whether a fault has returned · whether it persists · whether a repair removed it · whether new faults have appeared
This is especially useful for:
intermittent · electronic · complex · difficult-to-reproduce faults
Coding
Certain components require coding after replacement.
Depending on the system, we may perform:
control-unit coding · Variant Coding · vehicle configuration · recommissioning after replacement
where the required functions and access are available.
Teach-in and adaptations
Many modern components require:
teach-in · adaptation · initialization · basic settings · adaptive-value reset
after replacement or repair.
This may involve:
injectors · throttle body · clutch · transmission · sensors · actuators · electronic modules
Calibration
Some systems require calibration after an intervention.
Depending on the equipment, this may involve:
steering · sensors · suspension · headlights · cameras · radars · ADAS systems
The procedure is carried out only when the required technical conditions are met.
Programming and software
We can also assist with advanced electronic procedures including:
control-unit programming · reprogramming · software updates · configuration after replacement · recovery after interrupted programming
Certain procedures may require:
manufacturer access · online connection · licences · specific equipment
We use professional and authorised solutions where required.
Petrol diagnostics
On petrol engines, we may analyse:
injection · ignition · lambda control · fuel trim · fuel pressure · turbocharging · variable valve timing · emissions systems · sensors · control units
Diesel diagnostics
On diesel systems, we may analyse:
rail pressure · injection · injectors · turbocharging · EGR · DPF · AdBlue/SCR · NOx sensors · exhaust temperatures · differential pressure · engine management
depending on the application.
Hybrid diagnostics
Depending on the hybrid vehicle, we may diagnose:
combustion engine · hybrid system · battery · BMS · power electronics · charging system · control units · communication networks
Plug-in hybrid diagnostics
On PHEVs, analysis may involve:
combustion engine · electric drive · battery · BMS · OBC · charging system · power electronics
Electric diagnostics
On compatible electric vehicles, we may analyse:
BMS · battery · charging · onboard charger · power electronics · control units · communication networks · auxiliary systems
Specific work on high-voltage systems remains separate from electronic diagnostics and requires appropriate technical conditions.
Many vehicle and machine categories
Our work may also cover, subject to compatibility:
passenger vehicles · light commercial vehicles · vans · motorhomes · coaches · buses · trucks · heavy-duty vehicles · excavators · construction machinery · agricultural machinery · industrial equipment · construction equipment
Capabilities depend on:
manufacturer · model · protocol · system concerned
Mobile service for private customers
We can travel directly to the location of the vehicle.
This may be particularly useful for:
engine warning light · loss of power · immobilised vehicle · starting problem · transmission fault · ABS/ESP · airbag · AdBlue · DPF · hybrid problem · charging fault · intermittent fault
Support for garages and workshops
testecu.com also provides mobile technical support for:
garages · mechanics · body shops · workshops · companies · automotive professionals
We can assist when a workshop needs:
advanced diagnostics · ECU testing · Live Data analysis · coding · teach-in · programming · calibration
Your garage keeps its customer
Our intervention can be provided as complementary specialist support.
The vehicle stays in your workshop.
You keep your customer.
We provide:
equipment · experience · analysis · electronics expertise · software expertise
to help confirm the fault.
Professional support
WhatsApp / SMS / Phone: +33 6 66 77 33 00
E-mail: contact@bfgzone.com
Latest-generation professional equipment
We use several professional platforms in order to select the most appropriate tool for the vehicle.
Depending on the application, our capabilities include:
multi-brand diagnostics · manufacturer-level functions · online access · Live Data · active tests · programming · coding · adaptation · calibration
One universal interface cannot perform every advanced function on every manufacturer.
More than 20 years of experience
We have more than 20 years of experience in:
automotive electronics · diagnostics · fault finding · control units · programming · coding · embedded systems
Our priority remains to confirm the cause before authorising an expensive repair or parts replacement.
24/7 Emergency Support
Mobile emergency support may be available 24/7, subject to real availability and technical feasibility.
Typical situations include:
immobilised vehicle · sudden electronic fault · fault after repair · non-starting vehicle · problem after control-unit or component replacement · programming issue
For urgent requests:
URGENT
then send:
make · model · engine / powertrain · year · problem · location · photo if possible
Emergency contact
WhatsApp / SMS / Phone: +33 6 66 77 33 00
E-mail: contact@bfgzone.com
Mobile coverage across the French Riviera
We operate according to availability throughout a wide area:
Menton · Roquebrune-Cap-Martin · Monaco · Beausoleil · Cap-d’Ail · Èze · Beaulieu-sur-Mer · Villefranche-sur-Mer · Nice · Carros · Saint-Laurent-du-Var · Cagnes-sur-Mer · Vence · Saint-Paul-de-Vence · Villeneuve-Loubet · Biot · Antibes · Juan-les-Pins · Vallauris · Golfe-Juan · Valbonne · Mougins · Le Cannet · Grasse · Cannes · Mandelieu-la-Napoule · Théoule-sur-Mer · Fréjus · Saint-Raphaël · Roquebrune-sur-Argens · Sainte-Maxime · Grimaud · Cogolin · Gassin · Saint-Tropez
Mobile Auto Diagnostics – Côte d’Azur
For requests involving:
mobile auto diagnostics · electronic diagnostics · ECU testing · professional diagnostic scan · fault finding · Live Data · coding · teach-in · programming · calibration
we can travel directly to the vehicle according to availability.
testecu.com
Our method:
Test · Confirm · Program · Validate
or more simply:
Test before replacing. Confirm before repairing.
Professional diagnostics mean:
observe · measure · compare · test · interpret · confirm
before deciding which component genuinely needs to be repaired or replaced.
Contact
testecu.com
WhatsApp / SMS / Phone: +33 6 66 77 33 00
E-mail: contact@bfgzone.com
Mobile Auto Diagnostics · ECU Testing · Advanced Electronic Diagnostics
Private Customers · Garages · Professionals · Fleets
Petrol · Diesel · Hybrid · Plug-in Hybrid · Electric
Live Data · Active Tests · Coding · Teach-in · Adaptation · Calibration · Programming
Professional PDF diagnostic report sent by e-mail, SMS or WhatsApp
24/7 Emergency Support · Mobile Service across the Côte d’Azur
More than 20 years of experience